ianopk.blogg.se - Glow in the dark resin wood table

Using Envirotex Lite in a room where humidity is below 50% will give best results.

Humidity: All polymer compounds react to high humidity.

A clean, dry and dust free room is a must.

Plastic spatula, cardboard or business cards work well to help spread Envirotex Lite over large areas.

Stirring paddle must have a straight edge, such as a paint paddle, to allow user to constantly scrape sides and bottom of mixing container.

Do not mix in a wax coated container, as the wax coating may break free contaminating the mixture. Mixing container must be 50% larger than mix to allow for an adequate area for mixing.

Measuring cup & straight sided, flat bottom disposable paper or plastic pail.

Familiarize yourself with the following procedures by practicing on a small sample first. The following information and tips will help you achieve professional results. Large areas, tables & bar tops often require special application procedures when applying Envirotex Lite.

32 square feet Professional Tips & Troubleshooting Guide One coat is all that is usually required for a deep attractive finish, however, two or more coats maybe applied one over the other by simply wiping the surface with a clean cloth and alcohol prior to re-coating.Ĩ oz. This durable, resilient material requires no polishing to produce a high gloss. It cures to a thick, glossy coating in about 8 hours at 70☏, and reaches full strength and toughness in about 48 hours. Manufacturer InformationĮnvirotex Lite is a water clear reactive polymer compound. Learn how to make glow in the dark resin and epoxy. This product can only be shipped within the United States and not international. Since the pigment settles to the bottom one can easily use bigger particle sizes for a better glow. Glow powder of 50 microns or bigger works best. A higher pigment ratio to resin will glow better. You can add more or less powder as you wish. The pigment will settle to the bottom and it will leave you with a clear glossy top.Īny ratio powder to resin will result in a glow. Pour the mix as instructed by the manufacturer. Add glow in the dark or UV powder to the mixed epoxy and stir very well.

Table top resin for glow in the dark powders.